name.JPG (11748 bytes)

RNBWRULE-1.gif (30806 bytes)

MILL / DRILL & TAPPING MACHINE

DH-22257.jpg (16949 bytes) DH-22257 Motor: 1 1/2HP
Working capacity Spindle speed(R.P.M.)
IN CAST IRON   1 Speed motor: 60HZ 340-3000
*Drilling(mm)       40    (STANDARD)  : 50HZ 300-2600
*Face mill(mm)    76 2 Speed 1 1/2HP motor(4p/8p):
*End mill(mm)      20    (Optional)       60HZ 170-3000
*Tapping(mm)      16                                50HZ 145-2600
IN MILD STEEL      32 Spindle taper: MT3 or R8
IN LIGHT ALLOY   40 Spindle stroke: 130mm
Swing: 980mm
Working table: 550 x 500mm
Cross travel: 380mm
Column diameter: Ø 115mm
Machine packing mesurement L x W x H
762 x 864 x 1143mm(with stand)
584 x 864 x 1143mm(w/o stand)
N.W./G.W.:260/290kgs(w/o stand)
20' container q'ty: 36sets(with stand)
                                 52sets(w/o stand)
Stand packing: 965 x 800 x 203mm
N.W./G.W.: 28/29 KGS

                                    Optional attachments for all models:

DH-22257-1.jpg (4024 bytes)
1.Box working table
DH-22257-2.jpg (3295 bytes)
2.Tapping switch(3ø only) for DH-22257
DH-22257-3.jpg (4179 bytes)
3.Spindle power down feed
DH-22257-4.jpg (3969 bytes)
4.Spindle power down feed
DH-22257-5.jpg (3434 bytes)
5. Deluxe stand

DH-22257-6.jpg (3232 bytes)
6. 52pcs clamping kit

DH-22257-7.jpg (2792 bytes)
7. Power table feed
DH-22257-8.jpg (3045 bytes)
8.Face milling cutter and arbor
DH-22257-9.jpg (4183 bytes)
9. 7pcs Milling chuck

DH-22257-13.jpg (3528 bytes)          13.Inverter control box

DH-22257-10.jpg (3109 bytes) 10.Cooling system
DH-22257-11.jpg (3798 bytes)  11.Practical plastic belt cover
DH-22257-12.jpg (3660 bytes)
12.Cooling system at pedestal base
1. Box working table for DH-22257 Mini radial drill
3. Spindle power down feed for DH-22259,DH-22262,DH-22262-1
(Feed rate per R.P.M.:0.07-0.12-0.18mm)
4. Spindle power down feed for DH-22264-1,DH-22263-1,DH-22266
(Feeds rate per R.P.M.:0.10-0.18-0.26mm)
15. Extension column 11"(for DH-22258, DH-22259,DH-22264,DH-22264-1)
16. 820 x 240 mm Work table for DH-22258,DH-22259,DH-22264,DH-22264-1
17. NT#30 Spindle taper and much more attachments on request

binder-menu-motion1-b.gif (7209 bytes)blkright_cube_b.gif (13639 bytes)

RNBWRULE.GIF (30806 bytes)

Address : No.5, Tai Yuan 2nd street, Taichung, Taiwan, R.O.C.
Telephone : 886-4-2292 9815 ( 6 Lines)
Fax : 886-4-2292 4043
Email : dhic@ms7.hinet.net